Here is a summary for better solving maintenance problems or resetting Freedompro Modules.
Technical Specifications (110-240 V AC)
Dimensions | Height: 90 mm |
Internet connection | Wi-Fi 2.4 GHz IEEE 802.11b/g/n |
Maximum absorption (W) | 0,2 W |
Power supply | 110-240 V AC 0,1 A |
Certifications | Apple HomeKit |
Functions | Output timing |
Status Led
Check the color of the status LED located on the front of your Freedompro Smart Module to immediately view and understand the status of the device.
Why is the status LED on my Freedompro Smart Module red? Why is it flashing? Find it out in the blink of an eye!
Here’s a list of status LED colors' meanings:
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Fixed blue: System ready |
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Flashing blue: Pairing mode |
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Flashing green: Identify |
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Fixed magenta: No Wi-Fi connection |
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Flashing magenta: No internet connection |
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Fixed red: System boot |
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Flashing red: Error |
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Fast flashing red: Factory reset |
Schemi di cablaggio
Ecco lo schema di cablaggio:
Reset
Are you facing issues with your Freedompro module? Before you continue reading this guide, contact our Customer Service Department. If your only option is to reset your Freedompro module, follow this guide and you will reset your device in a matter of moments.
In fact, as the word itself says, performing a reset on a Freedompro module means resetting the product and thus restoring the factory settings.
| Pannello | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
The reset operation is irreversible, so once done, you cannot go back. |
Are you sure you want to reset your Freedompro module? Well, please follow the steps below:
Open the electrical panel or junction box where you have installed your Freedompro module;
Using a sharp tool, press and hold the "Setup" button on the front panel just below the status LED for about 10 seconds, until the status LED begins to flash rapidly red;
Wait a few moments and you will be able to set up your Freedompro module again.
Continue reading:
| Albero della pagina | ||||||
|---|---|---|---|---|---|---|
|