🇮🇹 Easykon for KNX | Accessori Compatibili

Compatibility table with Apple HomeKit, Google and Amazon Alexa

Accessory	Apple HomeKit	Google	Amazon Alexa
Light	yes	yes	yes
Thermostat	yes	yes	yes
Outlet	yes	yes	yes
Window covering	yes	yes	yes
Switch	yes	yes	yes
Fan	yes	yes	yes
Smoke sensor	yes	no	no
Contact sensor	yes	no	yes
Occupancy sensor	yes	no	no
Light sensor	yes	no	no
Temperature sensor	yes	no	yes
CO2 sensor	yes	no	no
Humidity sensor	yes	no	no
Leak sensor	yes	no	no
Motion sensor	yes	no	yes
Door	no	yes 1 - 3	yes
Garage door	no	yes 1 - 3	yes
Gate	no	yes 1 - 3	no
Lock	no	yes 3	yes 4
Scene	no	yes 1	yes 2
Window	no	yes 1 - 3	no
Light (3 Bytes)	yes	yes	yes
Scene (1 Byte)	no	yes 1	yes 2
Humidity sensor (2 Bytes)	yes	no	no

1 In the current version of the Google Home App, the control of the indicated accessories is exclusively through voice commands (last update March 2022).

2 In the current version of Alexa App scenes can be managed just with voice control (last update October 2020).

3 On Google platform, these accessories can be used just with a security code. You can set it up in the Freedompro app.

4 On Amazon Alexa platform, it is possible to decide if you want to manage the lock with your App and/or your voice. To unlock the lock you have to use a security code. You can set it up in the Alexa App.

Compatibility table with Home Assistant

Accessory
Light	yes
Thermostat	yes
Outlet	yes
Window covering	yes
Switch	yes
Fan	yes
Smoke sensor	yes
Contact sensor	yes
Occupancy sensor	yes
Light sensor	yes
Temperature sensor	yes
CO2 sensor	no
Humidity sensor	yes
Leak sensor	yes
Motion sensor	yes
Door	yes
Garage door	yes
Gate	yes
Lock	yes
Scene	no
Window	yes
Light (3 Bytes)	no
Scene (1 Byte)	no
humidity sensor (2 Bytes)	no

Compatibility table with IFTTT

Accessory	Trigger	Action
Light	yes	yes
Thermostat	no	yes
Outlet	yes	yes
Window covering	no	yes
Switch	yes	yes
Fan	yes	yes
Smoke sensor	yes	no
Contact sensor	yes	no
Occupancy sensor	yes	no
Light sensor	no	no
Temperature sensor	no	no
CO2 sensor	yes	no
Humidity sensor	no	no
Leak sensor	yes	no
Motion sensor	yes	no
Door	no	yes
Garage door	no	yes
Gate	no	yes
Lock	yes	yes
Scene	no	yes
Window	no	yes
Light (3 Bytes)	yes	yes
Scene (1 Byte)	no	yes
humidity sensor (2 Bytes)	no	no

Compatible accessories

The accessories on the KNX system are mapped within Easykon and made available on the Apple HomeKit, Google and Amazon Alexa Apps and voice assistants. Each accessory category is characterised by one or more parameters that you will find described in this article.

Light

The Light HSL (Hue, Saturation, Lightness) accessory controls the turning on and off, the intensity, saturation and colour of a light source. The different parameters to configure inside Easykon are on/off, brightness, saturation and colour.

Parameters:

On/Off

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = false 1 = true

Brightness

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

Saturation

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

Colour

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

Thermostat

The thermostat accessory is useful for controlling the room temperature, changing it and managing it.

Parameters:

Cooling-Heating

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = cooling 1 = heating

Current temperature

Group address Command	no
Group address Status	yes
Data Point information	ID 9
Length	2 bytes

Set temperature

Group address Command	yes
Group address Status	yes
Data Point information	ID 9
Length	2 bytes

Outlet

The outlet accessory allows you to control switching on or off an outlet.

Parameter:

On/Off

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = false 1 = true

Window covering

The window covering accessory manages the opening and closing of window coverings.

Parameter:

Position

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 100% (open) 255 = 0% (closed)

Switch

The switch accessory allows you to use a generic actuator to manage different devices.

Parameter:

On/Off

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = false 1 = true

Fan

The fan accessory controls switching on, off and adjusting the fan speed.

Parameters:

On/Off

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = false 1 = true

Rotation speed

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

Smoke sensor

The smoke sensor accessory detects the presence of smoke in a particular environment.

Parameter:

Smoke detected

Group address Command	no
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = smoke not detected 1 = smoke detected

Contact sensor

The contact sensor accessory detects whether a contact is open or closed.

Parameter:

Contact sensor status

Group address Command	no
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = open 1 = closed

Occupancy sensor

The occupancy sensor accessory detects the presence of a person in an environment.

Parameter:

Presence detected

Group address Command	no
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = presence not detected 1 = presence detected

Light sensor

The light sensor accessory detects the amount of light present in an environment.

Parameter:

Light level

Group address Command	no
Group address Status	yes
Data Point information	ID 9
Length	2 bytes

Temperature sensor

The temperature sensor accessory detects the temperature of a room.

Parameter:

Current temperature

Group address Command	no
Group address Status	yes
Data Point information	ID 9
Length	2 bytes

CO2 sensor

The CO2 sensor accessory detects the level of carbon dioxide present in an environment and if the set threshold level is exceeded.

Parameters:

CO2 threshold exceeded

Group address Command	no
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = CO2 in the norm 1 = CO2 higher than threshold level

CO2 level

Group address Command	no
Group address Status	yes
Data Point information	ID 9
Length	2 bytes

Humidity sensor

The humidity sensor accessory (1 Byte) detects the percentage of humidity in the air.

Parameter:

% of humidity detected

Group address Command	no
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

Leak sensor

The leak sensor accessory detects the presence of water.

Parameter:

Leak detected

Group address Command	no
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = no leak detected 1 = leak detected

Motion sensor

The motion sensor accessory detects motion in an area.

Parameter:

Motion detected


Group address Command	no
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = no motion detected 1 = motion detected

Door

The door accessory manages the open and closing of a door.

Parameter:

Position

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

To use the Door accessory in Google, you have to use a security code. Set it in the Freedompro app.
Using Google platform, it is possible to manage doors only with voice commands.

Gate

The gate accessory controls the open and closing of a gate.

Parameter:

Position

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

To use the Gate accessory in Google, you have to use a security code. Set it in the Freedompro app.
Using Google platform, it is possible to manage gates only with voice commands.

Garage door

The garage door accessory manages the open and closing of a garage door.

Parameter:

Position

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

To use the Garage door accessory, you have to use a security code. Set it in the Freedompro app.
Using Google platform, it is possible to manage garage doors only with voice commands.

Scene

The scene accessory allows you to activate a scene configured in the KNX plant, use this category for scenes that use 1 Bit, later in this list, you will find the scenes that use 1 Byte.

Parameter:

Scene trigger

Group address Command	yes
Group address Status	no
Data Point information	ID 1
Length	1 bit
Allowed values	1 (scene triggered)

In Google and Amazon Alexa platforms it is possible to activate scenes just with voice commands.
The scene accessory is not compatible with Apple HomeKit so it does not have the possibility to have additional features (available just on that platform).

Lock

The lock accessory allows to lock or unlock a lock.

Parameter:

Lock control

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = locked 1 = unlocked

In the Alexa App, in the lock settings it is possible to activate or deactivate the unlocking through App and voice control. If you activate these last ones, follow the steps in the App to set your unlock code.

Window

The window accessory controls the opening of a window.

Parameter:

Position

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

To use the Window accessory with Google, you have to use the security code. Set it in the Freedompro app.
Using Google platform, it is possible to manage windows only with voice commands.

Light (3 Bytes)

The RGB (Red, Green, Blue) Light accessory allows you to control the turn on/off of a light, its colour, saturation and brightness.

Parameters:

On/off

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = false 1 = true

RGB

Group address Command	yes
Group address Status	yes
Data Point information	ID 232
Length	3 Bytes

Scene (1 Byte)

The Scene accessory allows to activate a scene configured in the KNX system. You can insert the group address connected to the scene, that has 1 Byte length and the number connected to the specific scene you want to activate using this accessory on Google, Amazon Alexa and IFTTT platforms.

Parameters:

Scene trigger

Group address Command	yes
Group address Status	no
Data Point information	ID 17
Length	1 Byte
Allowed values	From 1 to 64 (select it in the Scene number parameter)

Scene number

Allowed values

From 1 to 64

In Google and Amazon Alexa platforms it is possible to activate scenes just with voice commands.
The scene accessory is not compatible with Apple HomeKit so it does not have the possibility to have additional features (available just on that platform).

Humidity sensor (2 Bytes)

The Humidity sensor accessory (2 Bytes) detects the humidity percentage in the air.

Parameter:

% of humidity detected

Group address Command	no
Group address Status	no
Data Point information	ID 9
Length	2 Bytes

Additional accessory features

Each accessory is characterised by a name and a set of predefined parameters.

The accessories light, window covering, outlet, fan, smoke sensor, contact sensor, occupancy sensor, light sensor, temperature sensor, CO2 sensor, Humidity sensor, leak sensor and motion sensor allow also to have a maximum of two additional features besides the main one. The additional features are supported by Apple only.

Use additional features when configuring accessories that combine different features into one physical object. For example, you can configure a ceiling fan as a Light accessory with the related parameters and insert the additional Fan feature, so as to control both functions from a single graphic element in the Apps.

The accessories door, window, garage door, scene, lock and gate are not compatible with Apple platform so they do not support additional features and cannot be used for this function.