🇬🇧 Light Module 4C 5 A | Installation

Owned by Alessandro Rossetti
Last updated: dic 02, 2022 by Daniele R.
2 min read

Technical Requirements

  • Freedompro Light Module 4C 5 A

  • Apple/Android Smartphone

  • 2.4 GHz WiFi network

Package Contents

  • Freedompro Light Module 4C 5 A

  • Quick Start Guide

  • HomeKit code sheet

Light Module 4C 5 A physical installation

Installing Freedompro Light Module 4C 5 A is really very simple, just follow these steps:

  1. Before installing your Freedompro module, disconnect power from the electrical system.

  2. Clip the Freedompro module to the DIN rail of the electrical panel, inside a junction box, or wherever you prefer.

  3. Connect accessory and control cables to the top and bottom connectors as shown in the connection diagrams.

  4. Connect the power supply as shown in the wiring diagrams.

  5. Verify correct wiring and reconnect power to electrical system.

  6. Status led of the Freedompro module will turn fixed magenta.

After connecting the device and powering it up, the device is immediately working with the switches connected to it at the bottom.

Now you can set up its settings and pair Freedompro Light Module 4C 5 A with smart platforms.

 

Continue reading: