🇬🇧 Easykon for KNX | Maintenance and Reset

Here is a summary for better solving maintenance problems or resetting Easykon for KNX.

Technical Specifications

Status Led

Check the color of the status LED located on the front of your Easykon for KNX to immediately view and understand the status of the device.

Why is the status LED on my Freedompro Smart Module red? Why is it flashing? Find it out in the blink of an eye!

Here’s a list of status LED colors' meanings:

Settings

In the settings you can:

• Backup and restore the setup

• Change the language of the panel

• See all product information

• Create the access code

• Change Easykon KNX physical address

• Log out

To access settings:

1. Log in to the web interface

2. Click on the wheel icon in the top right-hand corner

To return to the configuration panel, press the X in the upper right corner.

Backup

Making a backup is simple. Perform the back up to create a copy of the configurations of all the accessories so you can restore your work at any time.

To backup:

1. Log in to the web interface

2. Enter settings (gear wheel icon)

3. Select "Backup and restore" from the top menu

4. Click on the "Backup" button

5. Save the file to your computer

Restore

The restore function returns the accessories and their parameters to the state they were in when the backup was performed.

To restore:

1. Log in to the web interface

2. Enter settings (gear wheel icon)

3. Select "Backup and restore" at the top

4. Click on "Choose an .easykon file" and select the file from your computer

5. Click on "Restore"

Change the interface language

To change the interface language:

1. Log in to the web interface

2. Enter settings (gear wheel icon)

3. Select "Language" in the top menu

4. Select the flag of the desired language

Device information

In this section you will find all the information on the product.

To view this information:

1. Log in to the web interface

2. Enter settings (gear wheel icon)

3. Select "Device Information" in the top menu

Access code

The access code allows you to access to Easykon for KNX interface without pushing the button on the front side of the product.

To create the access code:

1. Access to the web interface

2. Enter settings (gear wheel icon)

3. Select "Access code" in the top menu

4. Click on "Create access code"

The access code will be visible just once, then it will be hidden for safety reasons. We encourage you to save it right away after creating it.

KNX physical address

The KNX physical address allows to identify in an unique way a device installed on the KNX bus.

As default, Easykon for KNX takes the address 15.15.250 in every system in which it is installed.

To change Easykon KNX physical address:

1. Log in to the web interface

2. Enter settings (gear wheel icon)

3. Select "KNX physical address" in the top menu

4. Change the address

5. Click on "Save" to complete the operation

The accepted values are:

0 - 15 / 0 - 15 / 0 - 255

Change Easykon KNX physical address can be useful if the address 15.15.250 is already taken in the system where you are installing the bridge.

Logout

The logout function allows you to safely disconnect from the interface.

To log out:

1. Log in to the web interface

2. Enter settings (gear wheel icon)

3. Select "Logout" in the top menu

4. Press the "Logout" button

Reset

Resetting Easykon for KNX serves to eliminate all previous configurations, users and preferences and return the product to factory settings.

So, are you sure to reset Easykon for KNX? Well, follow this guide, it' very simple!

• Press and hold the "Reset" button on the front with the help of a paperclip until the status light starts flashing blue

Continue reading: