🇬🇧 Easykon for KNX | Compatible Accessories

Compatibility table with Freedompro App, Apple HomeKit, Google Assistant, Amazon Alexa, IFTTT (trigger and action) and Home Assistant

ACCESSORY	FREEDOMPRO APP	APPLE HOMEKIT	GOOGLE ASSISTANT	AMAZON ALEXA	IFTTT		HOME ASSISTANT
ACCESSORY	FREEDOMPRO APP	APPLE HOMEKIT	GOOGLE ASSISTANT	AMAZON ALEXA	TRIGGER	ACTION	HOME ASSISTANT
Light	yes	yes	yes	yes	yes	yes	yes
Thermostat	yes	yes	yes	yes	no	yes	yes
Outlet	yes	yes	yes	yes	yes	yes	yes
Window covering	yes	yes	yes	yes	no	yes	yes
Switch	yes	yes	yes	yes	yes	yes	yes
Fan	yes	yes	yes	yes	yes	yes	yes
Smoke sensor	yes	yes	no	no	yes	no	yes
Contact sensor	yes	yes	no	yes	yes	no	yes
Occupancy sensor	yes	yes	no	no	yes	no	yes
Light sensor	yes	yes	no	no	no	no	yes
Temperature sensor	yes	yes	no	yes	no	no	yes
CO2 sensor	yes	yes	no	no	yes	no	no
Humidity sensor	yes	yes	no	no	no	no	yes
Leak sensor	on the way	yes	no	no	yes	no	yes
Motion sensor	yes	yes	no	yes	yes	no	yes
Door	on the way	no	yes ^{1 - 3}	yes	no	yes	yes
Garage door	on the way	no	yes ^{1 - 3}	yes	no	yes	yes
Gate	on the way	no	yes ^{1 - 3}	no	no	yes	yes
Lock	on the way	no	yes ³	yes ⁴	yes	yes	yes
Scene	yes	no	yes ¹	yes ²	no	yes	no
Window	on the way	no	yes ^{1 - 3}	no	no	yes	yes
Light (3 Bytes)	on the way	yes	yes	yes	yes	yes	no
Scene (1 Byte)	yes	no	yes ¹	yes ²	no	yes	no
Humidity sensor (2 Bytes)	on the way	yes	no	no	no	no	no

¹ In the current version of the Google Home App, the control of the indicated accessories is exclusively through voice commands (last update March 2022).

² In the current version of Alexa App scenes can be managed just with voice control (last update October 2020).

³ On Google platform, these accessories can be used just with a security code. You can set it up in the Freedompro app.

⁴ On Amazon Alexa platform, it is possible to decide if you want to manage the lock with your App and/or your voice. To unlock the lock you have to use a security code. You can set it up in the Alexa App.

Easykon for KNX is certified by Apple and works with Apple HomeKit while Easykon Lite for KNX is not compatible with Apple HomeKit because based on Raspberry Pi hardware.

Compatible accessories

The accessories on the KNX system are mapped within Easykon and made available on the Apple HomeKit, Google and Amazon Alexa Apps and voice assistants. Each accessory category is characterised by one or more parameters that you will find described in this article.

Light

The Light HSL (Hue, Saturation, Lightness) accessory controls the turning on and off, the intensity/dimming, saturation and colour of a light source. The different parameters to configure inside Easykon are on/off, brightness, saturation and colour.

Parameters:

On/Off

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = false 1 = true

Brightness

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

Saturation

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

Colour

Group address Command	yes
Group address Status	yes
Data Point information	ID 5
Length	1 byte
Allowed values	whole values from 0 to 255 0 = 0% 255 = 100%

Thermostat

The thermostat accessory is useful for controlling the room temperature, changing it and managing it.

Parameters:

Cooling-Heating

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit
Allowed values	0 = cooling 1 = heating

Current temperature

Group address Command	no
Group address Status	yes
Data Point information	ID 9
Length	2 bytes

Set temperature

Group address Command	yes
Group address Status	yes
Data Point information	ID 9
Length	2 bytes

Outlet

The outlet accessory allows you to control switching on or off an outlet.

Parameter:

On/Off

Group address Command	yes
Group address Status	yes
Data Point information	ID 1
Length	1 bit